The problem
Aging runs unattended stall overnight without staff; manual filling, button pressing and draining tie up operators, and life benchmarking has no stored records.
Capability
Aging endurance rig for coffee machines and core parts - boilers, heaters, copper tubes, seals and pumps. Ten stations on a two-deck layout with independent control; pressure 0.1-1.6MPa at 0.25 percent accuracy; aging time settable to 99M99S; outlet temperature ambient to 120C; three modes - pressure, drip and combined. Automatic dosed water fill with top-up on low level and solenoid drain when the cup is full; automatic rotating knob and pneumatic button-press fixture simulate real use; each station independently supplied at 110-220V/10A with 0-999min timer, overload protection and status lamps; over-voltage, over-current, water-shortage, blockage and over-temperature cut-outs; relay array with PLC (Modbus TCP), 10-inch touch screen, 100,000+ records on local SD card, audible-visual alarms with fault codes and remote monitoring reserved; 50L tank, 3.5kW per station.
Key specifications
- 用途：咖啡机整机及锅炉/发热管/密封圈/泵体耐久老化验证
- 工位：10工位，上下双层布局，独立控制
- 检测水压：0.1~1.6MPa，精度0.25%
- 老化时间：99M99S设定；出水温度：环境温度~120℃
- 测试模式：压力式/滴漏式/复合型三模式切换
- 自动化：自动定量加水+缺水补水，杯满电磁阀自动排水；自动旋转手柄+按键气缸
- 供电：每工位110-220V/10A独立供电，定时0~999min，过载保护
- 保护：过压/过流/缺水/堵水/高温自动断电
- 数据：本地存储≥10万条；RS485，预留以太网与远程监控
- 控制：智能继电器阵列+信捷PLC（Modbus TCP）+10英寸触摸屏
Applications
Endurance aging verification of coffee machines and core components; R&D life benchmarking; outgoing durability sampling and laboratory build-up
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.