The problem
Showroom samples cannot be connected to water, buyers only look without trying; makeshift plumbing floods the floor; factories still need another rig for pressure sampling.
Capability
Cabinet for showroom demonstration and on/off water supply testing of faucets, showerheads and other plumbed bathroom products. Dual-side body with 10 stations (5 per side) and 20 reserved pressure outlets; supply pressure 0-0.4MPa linear, stabilized by CDMF1-40SSC pump with VFD closed loop; ambient-temperature water recirculated from a stainless tank with level protection; G1/2 ball-valve couplers interchangeable for different fittings; 32-inch display of pressure and flow, clamp flowmeter 1-20L/min with 0.1 resolution, digital gauge 0-6.0MPa class 0.4; Mitsubishi FX3U PLC with analog expansion and solenoid valves; dual-stage filtration. Aluminium frame with composite panels; single unit 2600x1100x2300mm.
Key specifications
- 用途：水龙头/花洒等通水卫浴产品的展厅通水展示与通断供水测试
- 工位：双面10工位（每面5工位），预留20个水压出水口
- 供水压力：0~0.4MPa线性可调，高压泵+变频器闭环稳压
- 流量：管夹式流量计1~20L/min，精度0.1
- 显示：32寸显示屏实时显示压力/流量；数显压力表0~6.0MPa（0.4级）
- 接头：G1/2带球阀，可更换适配不同水件接头
- 水路：常温水循环；不锈钢水箱带水位保护；1寸双芯过滤系统
- 控制：三菱FX3U PLC+流量压力模拟量扩展；高压电磁阀分路控制
- 结构：铝型材框架+灰色铝塑封板+不锈钢水箱；工装不锈钢+铜材+POM
- 尺寸：单组双面柜体长2600×宽1100×高2300mm（底部置水箱水泵）
Applications
Water demonstration in bathroom-brand stores and showrooms; factory pressure sampling at faucet and shower plants; experience zones and model-room build-up
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.