The problem
Coating scratch resistance judged by fingernail; the standard tip geometry, angles and axial forces cannot be reproduced manually, so batches cannot be compared and disputes have no data.
Capability
Scratch test apparatus for enclosure coatings meeting IEC 60335-1 and GB/T 4706.1 clause 21.2. Hardened steel needle with 40-degree conical tip of 0.25mm plus/minus 0.02mm radius; needle angle to the horizontal adjustable 80-85 degrees; travel speed about 20mm/s; axial force 10N plus/minus 0.5N and 30N plus/minus 0.5N. Mitsubishi PLC with LCD panel and three-axis stepper positioning; stroke X 0-180mm, Y 0-200mm, Z drop 0-50mm, speed 0-100mm/s, counts 0-999999. Supplied with needle and pencil fixtures and weight sets for steel-needle scratch, pencil scratch, eraser and solvent rubbing tests. AC220V 50Hz.
Key specifications
- 用途：外壳涂层耐划痕试验（GB/T 4706.1条款21.2、IEC 60335-1）
- 试验钢针：40°圆锥形针头，顶端圆弧半径0.25mm±0.02mm
- 钢针倾角：与水平面80°~85°可调
- 轴向力：10N±0.5N / 30N±0.5N
- 划痕速度：约20mm/s（行走速度0~100mm/s可调）
- 行程：X轴0~180mm，Y轴0~200mm，Z轴下降0~50mm可设定
- 次数：0~999999次可预置
- 扩展：铅笔夹具+划针夹具+成套砝码，可做铅笔划痕/橡皮摩擦/溶剂摩擦
- 控制：三菱PLC+LCD数控面板+三轴步进电机
- 电源：AC220V 50Hz
Applications
Scratch-resistance verification of painted and printed enclosures for appliances and electronics; incoming coating inspection; laboratory build-up for certification bodies
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and lifetime technical service; 12-month warranty and lifetime spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.